|Small Business Information|
Top 10 Mistakes to Avoid When Joining a Professional Association
I'll be the first to admit that I went a little nuts when I moved I moved recently in terms of going all-out to participate in a variety of professional associations. I had some experience with most of the groups that I visited in other places I had lived, or had clients who had positive experiences with certain groups. I was so eager to become involved again in professional associations that instead of really paying attention to a group as it exists locally, I made decisions to join groups based on my past experiences and experiences of clients.
After a few months (and about $1500 in dues paid), I realized I had made a grave mistake. I knew I had failed to keep in mind a few essential thoughts as I evaluated the appropriateness of renewing membership dues to various groups as a way to build my business. Here's what I've learned:
1. Determine your professional association dues budget for the year before joining anything. I foolishly just kept paying membership dues, without giving consideration as to the total picture of what I'd spent in dues for the year. Set your spending limits and stick to those and in a year evaluate if it's worth your time and money to continue participating in the group.
2. Assess the true amount of time you have to fully participate in a group. As I was thinking about going to group meetings, I only factored in the actual monthly meeting--not the networking time, not the committee time, not the special event time. You may determine that you have much less time than you think.
3. Make sure the target market of your business is represented in the group. I joined one group thinking that it would be full of women business owners, as that had been my experience elsewhere. The Little Rock chapter was filled with women who were happily employed for someone else--not a good match for my needs in terms of building my business.
4. Visit the group the maximum number of times you are permitted to do so as a guest. Instead of doing this, I based my joining decision on one visit and impressions of the group I had gleaned from other areas of the country. You really need to assess whether this group in this location will meet your needs, as each chapter within an association can be dramatically different. The local members really do make or break a group.
5. Set your intention of your outcome before you decide to join the group. Are you joining to socialize, to find a date, get industry-specific education, meet other business people, or to build business relationships and make sales? Having a clear goal and focus and evaluating those goals in terms of realistically achieving those in the group should factor into your decision-making process.
6. Acknowledge that it might take you a year or more -- in the right group -- to build the trust others need to have in order to do business with you. Don't expect to walk into a group of people who do not know you and expect them to buy what you're selling or to enter into a joint venture with you. They have to get to know, like, and respect you before they're interested in doing business with you.
7. If you decide to join a group, you need to join a committee or two to get to know the membership. Simply showing up once or twice a month to a meeting will not help you get to know the other members of the group. It is at the committee level where the real networking occurs and where you will develop deeper relationships with other members of your association.
8. Ensure that the groups you join don't have essentially the same membership. If you're attending various group meetings and you see the same faces again and again, your time and money would probably be better spent diversifying your professional association memberships.
9. Is your industry over-represented in the group? I've attended some meetings of groups that were full of real estate agents or financial planners, and the group wasn't a professional association of either industry. Make sure your group is well-balanced in terms of member industries and that there is room within the group for someone from your industry to join without stepping on toes.
10. Only participate in groups that meet at a time of day when you're at your best. If you're not an early morning person, those "rise and shine" breakfast meetings probably won't work for you. Several groups I joined in Little Rock meet during lunch, and I've discovered that the middle of the day is the most difficult time for me to get away. Consequently, I've reduced the number of groups to which I belong who have lunchtime meetings, as that's just not convenient for me.
Joining professional associations can be a very powerful tool for growing your business--if approached with forethought and planning. Take some time this week to determine how this strategy fits into your overall business marketing strategy.
Copyright 2005 by Donna Gunter.
You may reprint in its entirety as along as the following attribution is made:
Donna Gunter is a Self-Employment Expert and Small Business Coach. She helps overwhelmed self-employed professionals become masterful managers of their businesses by coaching, training, and consulting with them on 8 key strategies proven to help them work smarter and make more.
Visit her website at http://www.self-employment-success.com and subscribe to her newsletter - Work Smarter Make More.
Small Business Server Business Tips
Top 3 Ways to Maximize Your Small Business Server Consulting Profits
10 Ways to Start a Business on a Budget
If you've been thinking about starting a business, but are held back due to cash-flow issues, there are plenty of ways you can get your plans off the ground. Though your vision may be to own a big store, restaurant, warehouse, or office, consider starting on a smaller scale.
Small Business Support Equals Survival
Support is critical for your small business survival. You may shy away from the thought of having an advisory board to guide you through your rough spots, but having a group of professionals who are willing to be your sounding board can mean the difference between success and failure.
Are You Satisfied With Your Business Just As It Is?
Did you know that satisfaction is the number one emotion people want to experience about their life and business? Yes, fame and fortune are up there, but satisfaction is the key. Satisfaction is about contentment, gratitude and pure joy. Are you satisfied with your business and your life? If not, read on and see how you can transform your life in the simplest method possible.
Data Loss - Can Your Company Survive? (Most Do Not)
Data. Most people think it is a term relegated to the kingdom of geeks.
Grants vs. Contracts
Commonly folks have asked me what the technical difference is between a contract and a grant. The difference is not about the dollar value or who the buying entity is nor the kind of work being done. Instead it is about the legal concept of default. In my eyes, the corner stone of whether something should be called a grant or a contract lies in whether one is legally bound to produce results as one is in a contractual relationship or whether you are simply granted funds to do something. Did you get that nuance? Perhaps that is oversimplifying it.
Breaking The Chains!
Everyday, customers and business owners are bombarded with billboards, logos, print and electronic ads from huge corporations. With annual ad budgets that are more than our businesses' SALES in an entire year, our small independent businesses are getting squeezed out of consumers minds (and wallets) more and more each year. But the good news is, there are ways to fight back and "break the chains":
Community Relations Strategy for Small Business
Does your company have a community relation strategy? Have you even considered it? It is essential to have policies in place. Having run a small business for years which eventually turned into a multi-state franchise system, I realized early on that a business who is part of the community it serves can survive the ups and downs of the business cycles, making it somewhat recession proof. Nothing turns off the community more than a business which refuses to give back a little and gives some ridiculous excuse of; "It is our corporate policy, sorry!" Many times a volunteer for a club or organization will come in and ask for a hand out. Rather than giving them an excuse, talk with them about what you can do, have a policy which helps them too. Do not just tell them sorry; "No can do" offer them other assistance instead. For instance if they come in a are looking for a donation, you might say. We are not able to give a straight donation, but we are allowed to give you an item or two on the discount rack for a door prize or silent auction.
Choose Your Own Guru
What is a guru?
Making Direct Mail Work for Small Businesses
If you own a small business, then you know the value of affordable and effective marketing. Unfortunately, many traditional and online advertising methods are becoming quite expensive. This article will explain direct mail guidelines and methods.
Buying a Business
Start thinking about buying an established business if you want to avoid the immense risks involved in starting one. Not everyone wants to start a business from scratch, and buying a business with the infrastructure in place lets you focus on building it up, as opposed to getting a new business off the ground. This is not to say that it's easy to buy an existing business; it's a fairly complicated process throughout which you need to know exactly what you're doing.
Awning Cleaning Business Case Study: Entrepreneurship 101
It is most fascinating to study how entrepreneurs spot opportunity in the market place. "My name is Lance Winslow and I am a serial entrepreneur, I admit I am addicted and need help." ..."Hello Lance." Let me explain how I formed one of my companies which became a franchise system in itself and became a module under the umbrella company I had formed many years the prior. I at first saw it as another business to fit into our growing niche of cleaning businesses. It was to be called the Awning Wash Guys. This is an interesting case study in how businesses form and how companies seek, find and exploit opportunity in the market place. Here is the story:
How to Create an Information Plan
What is in an information plan?
The Key to a Successful Business
Where would a business be without a business plan? A business plan sets the course for the future of the business. It gives the business owner or manager a sense of direction, listing the objectives and goals of the business from the outset.
Fleet Washing Operations Manual Sample Outline
In the Truck Washing Business every single type of vehicle is washed differently. If you are going to run a mobile onsite fleet washing business with multiple trucks in multiple cities you will in fact need a comprehensive manual to keep your crews and equipment running at an optimum. Below you will see a sample outline to assist you in constructing a washing procedure manual, which will include many different types of fleet vehicles.
Business Valuation is Critical
What is Business Valuation? The term business valuation is the method by which the business worth is determined. This usually happens when the business is for sale, when the business is looking for extra funding from the banks, when the business is considering taking on extra investors, or where the business is looking at merging with another organisation.
The Franchisors Heavy Load
Why are we over regulation the franchising industry, what purpose does it serve? Rules and laws are fine, level playing fields are nice, but the customer votes with their dollar and the entrepreneur and companies can only sell what people are willing to give up that unit of trade we call a dollar for.
Change May Be Your Ace in the Hole
Whether it has been thrust upon you by external market forces or it has simply bubbled up from the internal dynamics of your enterprise, change itself always presents opportunity for improvement. And in a knowledge based economy, change may be the only thing we can count on as small business people. So, if you want to stay ahead of the curve, you must embrace change as a necessary strategy for commercial success.
Collect that Debt - Your Business Depends on it
The efficiency of debt collection is the difference between a business that will succeed and a business that closes up.
Secrets of Cleaning Truck Trailers in Your Fleet from a Veteran Truck Washer
Cleaning the trailers towed by big trucks is not easy, those big forty-foot to fifty-three foot boxes are quite intimidating up close when you are holding nothing more than a brush and pressure washer gun, looking at a soap bucket. The hardest thing to do is to clean the back doors of trailers because they get really greasy from all the debris and stuff the truck has driven through. When they run through bad weather areas, they get even dirtier. Pay special attention to rear doors on trailers. Sometimes you'll have to brush them twice. You may even have to do them three times until you get them right. Use a harsh soap or degreaser and watch for left over dirt around the tubular bars that act as the door locks and sealing mechanism. Now on the top of the sides of the trailer you'll have lots of soot if you have a tractor that's been leaking or maybe has a small oil leak or an exhaust problem. This leaves this big exhaust stain down the side of the trailer from the exhaust stack on the tractor. This is a problem because it is hard to clean and you need to clean it. So sometimes you will have to stand on top of the tractor and brush downward. This is done because you cannot get enough leverage from the ground. You may need to pour cleaner directly on your brush or you may need to put cleaner directly on the sides of the trailer. You may need to do both. Make sure the brush is really wet and then set the nozzle on the spray bottle for a steady stream. Spray with the wind and shoot the spray up to the top of the trailer and kind of saturate it a little bit. Then brush it. Now it should be able to come clean. Make sure you rinse really well; otherwise you'll have soap streaks running down the sides. These will be black soap streaks because they will have some of the exhaust mixed in with the soap.
|home | site map|